• Omron Ethernet Ip Scada Software
• Profinet
• Ethercat

• ► 2016(70)
  • ► December(1)
  • ► November(3)
  • ► October(3)
  • ► September(1)
  • ► August(6)
  • ► July(4)
  • ► June(5)
  • ► May(6)
  • ► April(4)
  • ► March(12)
  • ► February(6)
  • ► January(19)

• ▼ 2015(137)
  • ▼ December(14)
  • ► November(11)
  • ► October(5)
  • ► September(12)
  • ► August(7)
  • ► July(8)
  • ► June(14)
  • ► May(9)
  • ► April(8)
  • ► March(17)
  • ► February(14)
  • ► January(18)

1. Feb 14, 2018  I did big scada for S7 1500 in C# (247 Tags). It is verry good and free. Yes, it has taken a long time to write compared to Wincc but it is my own scada. So now I need same thing for Allen Bradley Compactlogix IP.
2. Feb 16, 2016  In this video, Brad Vorrie walks you through the steps of setting up and EtherNet/IP Device on an Omron NJ. EtherNet/IP is one of the most common EtherNet protocols used in the United States.

• ► 2014(96)
  • ► December(13)
  • ► November(11)
  • ► October(15)
  • ► September(11)
  • ► August(11)
  • ► June(1)
  • ► May(1)
  • ► April(4)
  • ► March(6)
  • ► February(11)
  • ► January(12)

My wcp watermark editor win10. Omron FINS Ethernet Protocol Issues submitted 10 hours ago by awsmagala Hey, I am using a network of CJ2H Omron CPU that are connected and sharing data via Omron's FINS TCP/IP protocol.

• ► 2013(87)
  • ► December(4)
  • ► November(13)
  • ► October(18)
  • ► September(8)
  • ► August(5)
  • ► July(8)
  • ► June(4)
  • ► May(5)
  • ► April(12)
  • ► March(6)
  • ► February(4)

• Products
• Service & Support
• About Us
• Search

• Home>
• Products>
• Product Category>
• Automation Systems>
• Programmable Controllers>
• CP1>
• CP1W-MODTCP61

Modbus/TCP Master for CP1L and CP1H Micro PLCs Modbus/TCP Slave for CJ2M-CPU3x, CP1L and CP1H PLCs

Related Contents

• Features

last update: February 10, 2014

The CP1W-MODTCP61 allows Omron CP1L, CP1H and CJ2M-CPU3x PLCs to function as slave nodes on a Modbus/TCP network. The adapter can function as either a Modbus/TCP Master or as a Modbus/TCP Slave, but not both simultaneously. The Modbus/TCP Master mode is used to control/monitor IO blocks and other remote devices. The Modbus/TCP Slave mode responds to commands from a Modbus/TCP Master such as a PC or PLC.

Key Features and Benefits

Most Popular Network – Modbus/TCP/IP is the most popular remote I/O Ethernet network for PLC systems in the world

Simple setup – Web page configuration for IP Address & Master/Slave selection

Operates as a Modbus/TCP Master or Slave - As a Master, the adapter is used to control/monitor IO blocks and other remote devices. As a Modbus/TCP Slave it responds to commands from a Modbus/TCP Master (PC, PLC, other)

Perfect for Data Collection – The CP1W- MODTCP61 turns a CJ2M-CPU3x, CP1L/H PLC into a Modbus/TCP Slave that can easily share information with a Modbus/TCP Master for remote data collection or control

High Speed Counters & Expandable I/O – 4 x 100Khz counters built-in, up to 320 I/O (CP1H-X) & 180 I/O (CP1L-M60) PLCs

Programmable Slave for Motion, Temperature Control – Each PLC can be a powerful motion controller* (CP1H - 4 Axis, CP1L – 2 Axis) with high speed interrupts, Real Time Clock, PID, Floating Point Math and is expandable with digital I/O or analog for Temperature or Process Control. The addition of a Modbus/TCP adapter turns the PLC into a Low Cost Programmable Slave *Transistor models

Supports Multiple Connections - If the adapter is configured in Modbus/TCP slave mode, it can also support communications to CX-Programmer, NS HMI or other devices that use FINS (Omron’s open communication protocol)

Omron Ethernet Ip Scada Software

Gateway for Modbus/TCP & FINS Ethernet – Allows CS/CJ PLCs with Ethernet or EtherNet/IP to communicate using FINS through a CP1 PLC as a Modbus/TCP Slave

Profinet

last update: February 10, 2014

Ethercat

Product Category

• Automation Systems
  • Programmable Controllers
    • CP1
      • CP1W-MODTCP61

© Copyright OMRON Corporation 2000-2017. All Rights Reserved.